Black nylon PTFE braided fuel hose AN-8, length 4m
Nuke Performance black nylon PTFE stainless braided fuel hose. Available in AN-6, AN-8, AN-10 and AN-12. High quality, lightweight, full flow fuel hose for PTFE hose ends.
Nuke Performance offers a wide range of PTFE hose ends and fuel hoses. With the PTFE range you get a perfect solution for all types of fuel, including alcoholic fuels such as ethanol.
• Safe for all types of fuel, including ethanol
• For Nuke Performance Full-Flow PTFE hose ends
• Available in AN-6 / AN-8 / AN-10 AN-12
• Available in pre-cut lengths of 1 / 2 / 4 / 6 m
• A number of shrink sleeves included
• Much longer life than a standard fuel hose
The wide selection of hose ends from Nuke Performance are of the highest possible quality and are available in sizes AN-6 to AN-12 and in a variety of straight to 180-degree versions. The Full-Flow PTFE Fuel Line acts as cheap insurance for your injectors, filters and fuel pumps.
• Black Nylon Braided PTFE Lined Motorsport Fuel Line
The Teflon inner liner can withstand all types of fuel, including alcoholic fuels such as ethanol, methanol and racing fuels. Nuke Performance's PTFE fuel line has a much longer lifespan, as it does not degrade over time in the same way that standard nitrile rubber fuel line does. This will protect your injectors, fuel filters and in the long run your fuel pumps from getting stuck and damaged by the dissolved inside of nitrile fuel lines. The Nuke Performance PTFE fuel line is carbonized for conductivity, which is essential for motorsport fuel systems. The black nylon braided PTFE lined fuel hose from Nuke Performance is available in various sizes.
Full Flow PTFE Hose End Fittings: PTFE Hose End AN-8 range
• The PTFE liner inside the fuel hose acts as a vapor barrier
The Nuke Performance PTFE fuel hose has an internal Teflon (PTFE) liner that acts as a vapor barrier at driving all types of fuels. This becomes especially useful when running alcoholic fuels, which otherwise often run through a traditional nitrile or rubber fuel line. This is handy when you want to run the fuel lines in the driver's compartment, as well as in your workshop between races and racing seasons.
• Heat shrink sleeves included, prevents threading over time
The full flow PTFE fuel line uses an extra heat shrink, you get some included in the fuel line. Use the extra heat shrink to prevent the nylon braid from threading over time. They are also available as accessories if you want more than what is provided.
Included in the package: 1m = 2pcs / 2m = 2pcs / 4m = 4pcs / 6m = 4pcs heat shrink
Extra heat shrink for AN-6 / AN-8 / AN-10 fuel hose Part # : 810-21-018
Extra heat shrink for AN-12 Fuel Hose Part # : 810-21-022
• Outstanding flow capacity and extended life for motorsports
The Nuke Performance Full Flow PTFE Series uses a full flow design that allows you to design your fuel system with minimal flow loss. With its three-layer design, it has a much smaller outer diameter than a standard nitrile fuel hose. The PTFE liner prevents the fuel line from hardening and will not crack or crack. This helps prevent fuel leakage and the smell that would occur when running a standard nitrile fuel hose.
• Developed to high demands from worldwide motorsport
Co-developed with worldwide motorsport teams, this range of hose ends and fuel hose is ready to give you maximum quality even in demanding conditions. The Full Flow series of hose ends are made with the same characteristics as all other parts in the lightweight Nuke Performance motorsport series. There's no substitute for the quality of Nuke Performance!
• A wide variety of tools and accessories
To make your hose end and fuel installation as hassle-free as possible, Nuke Performance offers a wide range of practical fuel line fitting tools and accessories. The adjustable aluminum wrench with its V shape will revolutionize your hose end
Adjustable Aluminum AN Wrench AN-4 to AN-16 Part # : 700-30- 105
Aluminum Screw Jaws for AN Coupling Part # : 700-30-201
AN Aluminum Wrench AN-6/8/10/12 Part # : 700-30-101/2/3/4
Aluminum Olive Oil Replacement Parts, Part #: 810-20-106/8/10/12
Nuke Performance Full Flow PTFE Hose End Coupling available in AN-6, AN-8, AN-10 and AN-12. The matching braided PTFE fuel hose is available in pre-cut lengths of 1m, 2m, 4m and 6m (3-20ft).
• Nuke Performance PTFE Hose End / Fuel Hose Specifications
For more information on specifications, see the product manual.
| AN-8 Hose Series # | 820-02-108 - 820-02-608 |
| AN-8 Hose Ends # | 810-01-108 - 810-18-108 |
| Available sizes | AN-6 / AN-8 / AN-10 / AN-12 |
| Length fuel hose | 1m (≈3ft) / 2m (≈6ft) / 4m (≈13ft) / 6m (≈20ft) |
| Fuel compatibility | Gasoline, methanol, ethanol, E85, racing fuel, diesel, oil |
| Heat shrinks included | 1m=2pcs / 2m=2pcs / 4m=4pcs / 6m=4pcs |
| Fuel hose inner lining | PTFE (Teflon) inner lining |
| Fuel hose braiding | Stainless steel and nylon |
| Temperature Range | -70°C to 250°C (-94°F to 480°F) |
| Conductive Inner Lining | YES |
| For Motorsport Use | YES |
| AN8 Operating Pressure | 170 BAR (2500 PSI) |